Click to Enlarge

2015 Agfa Advantage N-DL

ALI Reference #: 105403
 

2015 Agfa Advantage N-DL

Essential peice of equipment in a plant shop with an offset press. This CTP can hold up to one thousand plates.

Agfa Details:

Agfa Advantage N-DL
With VCF 85 Cleanout
  • Agfa Counter: 223,276
  • RIP: Rampage
  • Holds up to 1,000 plates
  • Single plate of panorama format size
  • Up to 3 plate formats
  • Max Plate Size: 49.21” x 27.95” (1250 x 710 mm)
  • Min Plate Size: 10.82” x 17.75” (275 x 451 mm)
  • Fully automatic plate handling
  • Throughput: 300 plates per hour
  • Resolutions: 900 – 2540 dpi.
  • Agfa patented Flex Register system accommodates up to 100 different plate formats.
  • Automatic Slip Sheet Removal
  • Power Supply: 10A 230V (50 / 60 hz.)
  • Air Supply: 5,5 – 6,8 bar
Dimensions:
  • Width: 49.02” (1245 mm)
  • Length: 155.51” (3950 mm)
  • Height: 66.93” (1700 mm)

Agfa VCF 85 Cleanout
Plate width, min.-max. 200-850 mm (7.9-33.5”)
Plate length, min. 275 mm (10.9”)
Plate thickness, min.-max. 0.15-0.30 mm (0.006-0.012”)
Platesetters Advantage N, Polaris

Performance
Plate speed 40-120 cm/min
Scrub roller speed 150 rpm

​Temperatures
Preheat: 0-150 °C (122-302 °F)
Gum 1: 20-27 °C (68-81 °F)
Gum 2: room temperature
Dryer, Process: 35-55 °C (95-131 °F)

Tank volumes
Gum 1: 40 lit. (10.6 US gal.)
Gum 2: Open system (back to bottle)
Noise emission (max.) < 70 dB

Physical Specifications
Dimensions (w x l x h) 1430mm (56.3”) x 1500mm (59.0”) x 1000-1160mm (39.4-45.6”)
Weight crated
Crated: 530 kg (1168 lb)
Empty unit: 390 kg (860 lb)
Filled unit: 427 kg (941 lb)
Electrical Specifications
Europe 3-phase, 3W+N+PE, 400VAC/14Amp / 50/60 Hz
USA and Japan 3-phase, 3W+PE, 208-230VAC/23Amp / 50/60 Hz
Voltage tolerances (all) +/- 10%
Power consumption (EUR/USA/JAP)
Stand-by: 100 Watt-hour (342 BTU)
Maximum: 5500 Watt-hour (17160 BTU)

 
Celebrating 40 years
member of PIASC
member of IPMA